Belt fire rescue
Belt fire rescue (hereinafter PPP) is designed for insurance when working at height, rescue personnel and samosatene firefighters while fighting fires and carrying out the associated priority of rescue operations and to carry fire axe and carbine fire.
The belt has two-starlevel buckle (1), clamp (2), karamenderes (3), loops (4), ribbon belts (5) lining (6). Studs buckles and buckle provide rigid fixation belt at waist fire. Arabinogalactan provides reliable communication between the teaching staff and a carbine, but using loops is the placement of the carabiner and its conformance to PPS. (see picture).
Tape PPS - technical special purpose (model FWG) polyester fire-resistant impregnation. Buckle and arabinogalactan - steel with corrosion-resistant coating. Collar, belt loops and lining - semitrailer-saddle leather.
PPP is characterized by simplicity of design, ease of use, adaptability, high quality materials and relatively small mass. Trim, clip and belt loops made of genuine leather, which contributes to belt when flexing, and increases durability of pin holes for buckle.
safety belt for firefighters PPS withstands a static load of not less than 11,25 kN for at least 60 seconds after exposure to it:
- ambient temperature 50 °Cfor at least 6 hours
- of ambient temperature minus 40 °Cfor at least 6 hours
- ambient temperature 200 °Cat least 3 min.
- waterno less than 1 hour
- 6% of foam solutionno less than 1 hour
On buckle installed studs, which virtually eliminates moving a lap belt in buckle. free end of tape does not cover arabinogalactan. belt loops are sewn to ribbon belt. Application sobornoy buttons creates easy attachment of a carbine and increases durability of belt loops.
|
|
|
|
|
|
|