Personal protective equipment category III, corresponding to four standards.
It is intended for use in extinguishing fires in non-urbanized areas (forests, meadows), as well as during rescue operations of technical and road nature. The innovative design of the body-sphere is made on the basis of injection technology of the highest quality materials with improved mechanical parameters. The helmet is multi-functional, lightweight, vented.
Meets the requirements of regulations:
– EN 16471:2014 Firefighters helmets. Helmets for extinguishing fires in non-urban areas.
– EN 16473:2014 Firefighters helmets. Helmets for rescue work.
– EN 12492:2012 Mountaineering equipment. Helmets for climbers. Safety requirements, test methods.
- EN 397: 2012 Industrial safety helmets
This is confirmed by the certificate of estimation of the type WE NO. DPI/0497/1125 issued by an accredited institution No. 0497 CSI S. p.A, Italy.
Full protection at low and high temperatures (-20°C ÷ +50°C), shock absorption capacity, resistance to penetration by a steel ball flying at a speed of 120 m/s, resistance to side compressive forces, resistance to liquid chemicals and hot solids, resistance to short-term contact with electric wires under alternating voltage up to 440 V, as well as other factors specified in the above standards.
External elements of non-combustible fabric, including chin straps.
Reflective elements that ensure the visibility of the rescuer.
Optimal adjustment in size, as well as a stable hold on the head of the rescuer provide: a wide range of head circumference adjustment (47-68 cm), a large handle that allows you to adjust the gloves, the height adjustment system, a 3-point chin strap.
In accordance with the standards, the helmet is equipped with a universal multifunctional handle, a panel ventilation system and reflective elements.
Rich functional equipment: face protection and eye – protective glasses or the viewfinder, sinking to wearing a breathing mask, and enable them to work to rescuers who wear correctional glasses; shoulder flaps-collars made of non-flammable fabrics; items that are designed for hearing protection; face is protected by a mesh or a plastic plate; the handle of the head of the flashlight; silicone chin; a comfortable lining made of mesh NOMEX; protective mesh on the vents.
A wide range of accessories-helmet is adapted for joint use with breathing masks and lanterns.