Core performance and characteristics:
|Working pressure, MPa
|continuous Consumption of jet, l.C-1
|Range of continuous jet, m
|Flow of spray jet, l.C-1
|Range of spray jet, m
|Effective range of spray jet, m
|Medium intensity irrigation spray jet, l.C-1.m2
|angle of torch of spray jet, degree
|water Consumption protective veil l.C-1
|Angle torch, protective veils, degree
|diameter of torch protective veil m
|Expense of an aqueous solution S, l.C-1
|OM Concentration in water solution, %
|Range of jet of an aqueous solution of S, m
When using foam nozzle NASTAVEK ZA PENO.
range of application of jets of foam, m- multiplicity of foam
1. Indicators purpose when water is given at an operating pressure in front of barrel 0,4 (+0,05) MPa.
2. Indicators of destination when applying given solutions S at an operating pressure in front of barrel 0,6 (+0,05) MPa.
barrel fire ROCNIK TURBOMATIC:
• water Flow in barrel 100 l/min (1.7 l/h), 200L/min (3.3 l/s) 300 l/min (5.0 l/sec) and 400 l/min (6.7 l/sec) is set by rotating ring of plastic coated with a specified numerical targets expenses;
• Possibility of stepless change view from solid jet to spray by rotating bumper trunk is made of heat-resistant rubber. Ring bumper caused informative signs indicating kind of spray. angle range of torch spray jet from 0°-120°.
• to connect to coupling head of GR-50 fire pressure hoses on trunk mounted rotating coupling head of corresponding type and diameter.
• Opening and closing perekisnogo valve water, air-mechanical foam to be carried out by means of handle covered by rubber, which is located in vertical plane of barrel, and has a movement in direction of bumper trunk and coupling head. specified handle is for stepless control of flow rate. On handle caused informative signs indicating direction of opening and closing perekisnogo valve. specified handle has a width of 110 mm to be able to work with a gun in glove or glove on fire.
• For formation of spray jets and water curtain, barrel in front of bumper equipped gear rotating turbine (turbulation).
• Trunk is equipped with a comfortable handle by which it must be held in hand of a fireman or lifeguard. handle is made of aluminum alloy and rubber coated with four pocket to secure her fingers. Pen barrel is removable for its replacement and reduce overall dimensions of trunk during transport.
• Trunk is equipped with a mount (in a thread) at front of bumper for connection to trunk foam nozzle for receiving foam, average multiplicity.
• Trunk and foam nozzles are made of aluminum; anodized housing stem.
• barrel Length 270 mm (with a foam supply nozzle - 640 mm), trunk height 250 mm (with handle), weight of barrel 2.15 kg (with foam supply nozzle-2.75 kg). length of foam nozzle 385 mm, outer diameter 45 mm, weight 0.6 kg.
Barrel is made in climatic design UHL, category 1.1 according to GOST 15150. Full service life of 10 years.