The boots are made from natural waterproof smooth leather and oiled and stitched with fire resistant thread. Inside the boots have a package of special materials*(see the description of the package materials)
The sole of the boots is made of special material and is heat-resistant, resistant to high and low temperatures, has anti-static properties and has anti-slip protection. Sole equipped puncture insert made of Kevlar. Reflective tape yellow. A special coating of heat-resistant rubber to protect the toe of his boot. Execution of the boot allows them to operate at negative temperatures up to minus 55° C.
The boots provide protection against the penetration of water not less than 60 minutes. There are two handle-loops for easy donning of the boots. The boots have inserts in the bend area of the foot for walking comfort and performance on fire.
The resistance of package materials midsole puncture between the reefs of at least 1200 N.
The toe part of the boot toe with rubber edges to protect toes. Safe internal clearance in the toe portion at impact energy of 200 j, not less than 20 mm.
The stability of the toe part to the influence of ambient temperature at 200C not less than 300 sec.
The stability of the toe part to the effects of heat flux of 5.0 kW/m.
Boots are manufactured in the following sizes: 39-46 (37, 38, 47 and 48 are made to order).
The package of materials of the boot
1. Waterproof heat-resistant leather, thickness 2,2 – 2,4 mm
2. Insulation material Thermo King c of 4 layers, including a layer of aluminum foil
3. The insulating amplifier
4. Insulation with Sympatex membrane
The boots conform to the requirements of Technical regulations on fire safety requirements" approved by the Federal law dated 22.07.08 No. 123-FZ of GOST R 53265-2009 "means of individual protection of feet of fire", the European standard EN 345 and resistance to negative temperatures up to minus 55°C