Boots made of waterproof molded leather and stitched with fire resistant thread. At the top of the shoes is an insert of red leather. Inside the shoes have a lining of "breathable" material combined with a membrane and equipped with an insole that absorbs moisture. The inner tongue of the boots is sewn to prevent water penetration. The shoes are equipped with laces and metal zipper for tight fixation on the foot. The zipper tongue is made of leather and is fixed on the Shoe with a metal button in order to avoid spontaneous unbuttoning of the zipper. There is a loop at the back of the shoes for easy putting on of the shoes. On the shoes are reflective tape yellow. On the toe of the Shoe there is a special pad of heat-resistant rubber to protect the foot and toe of the Shoe. An anatomical stitched insert in the back of the boots is provided for the convenience of the firefighter to work in a sitting position and when overcoming obstacles.
The shoes provide protection against the penetration of water not less than 60 minutes. The sole of the boots is nitrile heat-resistant, resistant to high and low temperatures, has anti-static properties and is protected from slipping.
Shoes equipped with puncture-insert (footbed), the resistance of package materials midsole puncture between the reefs of at least 1200 N.
The toe shoes are equipped with a tray with rubber edges to protect the toes. Internal safe gap in the fore part at impact energy of 200 j, not less than 20 mm.
The stability of the toe part to the influence of ambient temperature at 200C not less than 300 sec.
The stability of the toe part to the effects of heat flux of 5.0 kW/m not less than 300 sec.
Boots are made of the following sizes: 38-47 (36, 37, 48 and 49 are made to order).
Shoes meet the requirements of Technical regulations on fire safety requirements" approved by the Federal law dated 22.07.08 No. 123-FZ of GOST R 53265-2009 "means of individual protection of feet of fire" and European standard EN 345.