Managed telescopic adapters EXTEND-A-GUN RC3 EXTEND-A-GUN RC4
Driven telescopic adapters EXTEND-A-GUN RC3 (EKSTENDA-e-GAN PC3) and EXTEND-A-GUN RC4 (EKSTENDA-e-GAN RS4) are designed for installation fire monitor for fire fighting truck.
Telescopic adapter allows you to raise the trunk to a height of 457 mm from the transport position by pressing just one button on a standalone remote control. The offline control panel allows you to control fire monitors at a distance 4 m from the car.
gun Carriage, mounted on this adapter can be freely rotated 360 degrees in the horizontal plane.
the diameters of the input sections of the adapters are:
EXTEND-A-GUN RC3 – 75 mm
EXTEND-A-GUN RC4 – 100 mm
the Housing is made of anodized aluminum with a steel protective casing.
There is a built-in sensor alarm status "gun Carriage in a raised position". Waterproof motor housing for 12 V or 24 V.
Main stationary unit remote control fire monitors is designed to control fire monitors in the distance. To him be the external energy and can connect wireless remote control. All commands from this control unit have a higher priority over commands from the control unit installed in the trunk. The kit includes a 3 meter power cable.
advanced remote control fire monitors is designed for redundant connections to the main control unit.
In the optional unit includes 9-foot cable to provide power and remote control fire monitors.
Wired remote control fire monitors provides management by connecting the trunk line cable at a distance of 9 or 30 meters (the length of the standard connection cable).
All commands from this control unit have a higher priority over commands from the control unit mounted on the carriage.
Wireless remote control fire monitors provides management of fire monitors at a distance of 152 m from it.
The remote is powered from NiCd batteries, and the charger also serves as a panel holder.
To work you need to connect the receiver unit to the main control unit via a 3-meter patch cable.
|
|
|
|
|
|
|